nexen BD CALIPER BRAKES
A robust caliper brake with either air actuation or spring actuation (with air & sping emergency braking provision) this caliper is ideal for industrial applications requiring holding, stopping of high inertial loads, controlled deceleration or tension control. Combined with a cast iron vented disc it allows very high heat disapation and thermal loads.
Customers can now take advantage of a high performing brake at an affordable cost for their emergency stopping and/or holding applications.
Nexen's BD Caliper Brake is spring applied and its compact actuator is hydraulically released, with mounting capabilities on either side of the brake. Capable of high cyclic duty, this BD Caliper Brake is ideal for rapid start/stop applications. Its simple design with very few seals and moving parts make installation and maintenance easy.
The brake shoes mount with detent pins for quick friction facing replacement and all pivot pins have life-lubricated pivot-point bearings. The BD brake has proven itself by its low-cost and high performance in several types of applications and industries such as sawmill, steel mill, bulk material conveyor, automotive production, wind turbine, amusement parks, ski lifts, pulp and paper, wire rolling/drawing and textile.
BD Model Air Actuated Caliper Brakes provide:
-
Static Torque capacity up to19,000 In. Lbs. psi with 24 inch disc
-
Air Actuated
-
Actuators mount on either sideof the brake
-
Air connections can be rotated 360 degrees around actuatoraxis
-
Multiply stopping power byinstalling more than one caliperbrake per disc
-
Shoes are mounted with detentpins for quick replacement
-
Caliper spacing fits 0.500 inchwide discs
-
SPC shoes fit on BDModelCaliper Brakes for longer life andhigher peak input rate
-
All pivot points have life-lubricated bearings
-
Optional discs from 12 to 24inch diameters
-
Disc Speeds up to 3200 rpmwith 14 inch discs
-
QD Bushing compatible, forshaft sizes up to 3.875 inches