Nett Technologies

Bluecat™ 300 LSI

Verified by the California Air Resources Board (CARB), Nett Technologies’ BlueCAT™ 300 system was developed for installation on uncontrolled on LPG and CNG Large Spark-Ignition (LSI) engines.

Typically found in use on forklifts, floor care machinery, aerial lifts and ground support equipment, these LSI engines would greatly benefit from the BlueCAT™ 300 emission control system.

  • California Air Resource Board (CARB) verified system
  • System is designed to operate on gaseous (LPG, “propane”, “propane-butane” and CNG) fueled
  • Large Spark Ignited (LSI) engines
  • Great at reducing deadly emissions, such as Carbon Monoxide (CO), Hydrocarbons (HC) and
  • Oxides of Nitrogen (NOx)
  • Direct-fit replacement for the original muffler which simplifies the installation and saves time
  • Air/Fuel ratio Controller that goes with the system helps to control and monitor the system performance
  • BlueCAT™ 300 catalytic muffler matches or surpasses the original muffler in sound attenuation and back pressure characteristics with addition of superior emissions performance

BlueCAT™ 300 – Technology

The BlueCAT™ 300 is a Retrofit Emissions Control System which has been verified by the California Air Resources Board (CARB) for installation on uncontrolled gaseous fueled Large Spark Ignited (LSI) engines. BlueCAT™ 300 systems control exhaust emissions and noise from industrial forklift trucks and other spark ignited rich-burn (stoichiometric) engines. Nett Technologies’ BlueCAT™ 300 practically eliminates all of the major exhaust pollutants: Carbon Monoxide (CO), Hydrocarbons (HC) and Oxides of Nitrogen (NOx) from engine exhaust.

The BlueCAT™ 300 system consists of a 3-Way Catalytic Converter/Muffler, and a digital Air/Fuel Ratio Controller (A/F). The entire system is designed for quick and easy installation:

  • an oxygen sensor port is built into the converter/muffler
  • the self-diagnostic Electronic Control Unit (ECU) comes complete with all wiring and connectors
  • comprehensive instructions, refined by hundreds of installations, are included
  • The BlueCAT™ 300 ECU is packaged in a rugged metal enclosure suitable for dash or engine compartment installation. The controller incorporates an on board diagnostic system, which allows constant monitoring of the operation and simplifies set-up. The combination of lights built directly into the unit provides an indication of controller operation without the need for additional monitoring tools. The diagnostic functions include a power and failure light, a warm up and O2 sensor light, and a set of lights to monitor the percentage of A/F ratio modulation. It also includes a dashboard-mountable warning light to alert the operator in case of system failure and to prevent the release of excessive emissions.