Boschert
Safety Chucks – VT and Classic C
Boschert safety chucks hold the winding shaft at each end, carry the torque and lock shut while turning. Choose the VT chuck with quick, cheap-to-replace wear parts, or the low-cost Classic C chuck – foot or flange mounted, with or without a shaft end.

- 150 kg – 64 tmax. shaft weight
- 40 – 41,000 Nmmax. torque
- 14 – 230 mmsquare bar
- since 1948Classic C-chuck
The range
The Safety Chuck Range
VT Safety Chuck
Chuck with exchangeable VT wear parts and a chromed handwheel.
- Foot or flange mounted
- Square and shaft end to suit
C Safety Chuck
The Classic chuck: the swivelling handwheel secures the journal in the square bars.
- Low cost
- Ordinary duty
Flange-Mounted Chuck
Flange version for mounting directly to the machine frame.
- With or without shaft end
Sizes
From the Boschert catalogue overview. C chucks are available in sizes 22-30 to 40-50.
| Model | Max. shaft weight | Max. torque | Square bar |
|---|---|---|---|
| Mini | 150 kg | 40 Nm | 14 – 20 mm |
| 19-25 | 400 kg | 120 Nm | 19 – 25 mm |
| 22-30 | 800 kg | 180 Nm | 22 – 30 mm |
| 30-40 | 1,600 kg | 350 Nm | 30 – 40 mm |
| 40-50 | 2,800 kg | 1,100 Nm | 40 – 50 mm |
| 50-80 | 7,000 kg | 2,350 Nm | 50 – 80 mm |
| 80-120 | 12,000 kg | 10,000 Nm | 80 – 120 mm |
| 120-180 | 22,000 kg | 20,000 Nm | 120 – 180 mm |
| 170-230 | 64,000 kg | 41,000 Nm | 170 – 230 mm |
Options include 90° foot mounting, extended chucks, HRV-S and HRV II handwheel locks, automatic airshaft inflation, hydraulic opening and closing, and open/close monitoring.
How it works
How a Safety Chuck Works
Hold the shaft, drive it, and never let it go.
Square Drive
Each end of the winding shaft has a square journal. It drops into the chuck’s square insert, which carries the drive or brake torque to the shaft.
Locked Shut
A handwheel swings over the journal and locks it in. The chuck can’t open while the shaft turns, so the shaft can’t jump out – then it opens fully so a crane or hoist can lift the shaft straight out.
VT: Replaceable Wear Parts
On VT chucks, the parts that touch the journal are separate VT wear parts. When they wear, you swap them – quickly and cheaply – instead of replacing the chuck, and their hardness can be matched to your shaft journals.
VT or C?
Two Proven Designs
VT: Low Running Cost
Replace only the VT wear parts – quick, cheap, short lead time and low stock cost.
VT: Flexible
Wear part size, shape and hardness to suit your shaft journals.
C: Simple
A low-cost chuck for ordinary use – the industry standard since 1948.
Both
Chromed handwheel, rubber finger guard, foot or flange mounting.
How to choose
Choosing a Chuck
Weight
Shaft plus full roll.
Torque
Drive or brake torque at the shaft.
Square
Journal square size – and the shaft end, if needed.
Mounting
Foot or flange; add a brake or clutch if required.
Literature & related
More Information
- Safety chuck overview
Sizes, loads and torque · PDF, 13.7 MB - Options
Locks, monitoring and hydraulics · PDF, 13.7 MB - Boschert product catalogue
Safety, sliding, automatic and pneumatic chucks, brakes, clutches, options (2024) · PDF, 13.7 MB
Not Sure Which One You Need?
Tell us about the job – the machine, the conditions and what it has to do – and we’ll help you choose the right Boschert product.